Machine designers are increasingly turning to crossed roller bearings for use in motion systems thanks to their high accuracy, rigidity and efficiency. This type of bearing uses alternately crossed rollers positioned at right angles to each other between inner and outer rings, which allows them to take radial, thrust and moment loads from any direction at the same time. Because the rollers make line contact with raceway surfaces, there's less deflection under load and more rigidity.
Crossed roller bearings are particularly suitable for applications with moderate rotational speed such as industrial robots, machine tools and medical equipment, especially because they come with a spacer to separate one roller from the other.
Crossed roller bearings types and features
CRA Thin type(Separable Outer Ring for Inner Ring Rotation)CRA Series is a kind of small size and light weight crossed roller bearing which makes the wall thickness thin. It can sustain heavy load. Therefore, The shaft block and the side supported flange can be light weight. It can be easily used in the rotary location, such as the hand location of the robots. The outer ring of CHRA is separable and fixed by special rivets.
CRBC Standard Type(Separable Outer Ring for Inner Ring Rotation)CRBC series is inner ring and outer for 2 division for the overall design of the structure, inner ring through the bolt connection as a body, applicable to their requirements of high accuracy rotating place.
CRB Standard Type(Separable Outer Ring for Inner Ring Rotation)CRB series is inner ring and outer for 2 division for the overall design of the structure, inner ring through the bolt connection as a body, applicable to their requirements of high accuracy rotating place.
CRBH Standard Type(Separable Outer Ring for Inner Ring Rotation)CRBH series of inside and outside by the integral structure around it, rigid better, particularly suitable for installation size limited, high precision, and at the same time, high rigidity requirements of the occasion.
CRC Standard Type(Separable Outer Ring for Inner Ring Rotation)CRC series cylindrical cross roller bearing is similar to CHRB Series. The two separable outer rings are connected by cirlips.
CRE Standard Type(Separable Inner Ring for Outer Ring Rotation)CRE series is inner ring and outer for 2 division for the overall design of the structure, inner ring through the bolt connection as a body, applicable to their requirements of high accuracy rotating place.
CRU Standard Type(mounting holes, high rigidity)CRU series high rigid cross roller bearings because all the whole structure internal and external ring, with high rigidity, and installed with a hole, when installation, don't need fixed flange and housing, greatly simplified installation procedures, and no influence on installation precision, it is of high precision and large rotating torque, at the same time, can also according to the precision requirement free choice inner circle or outside of the rotating way with greater freedom of choice.
No comments:
Post a Comment